User Tools

Site Tools


Sidebar

Welcome

General Policies

Knowledge Base

Provisioning Guides

Firmware Updates

FAQ's

Engineering Docs

kb:common.issues:dalight.savings.spa525

Set Daylight Savings Time - SPA-525

This may also work on other Cisco models as well, but may be found in a different location.

On the Cisco 525 phone web GUI, under the Regional Tab, scroll to the bottom and in the Time section, place the following text in the Daylight Saving Time Rule box.

Note to U.S.A users. The following example reflects the new change starting March 2007.

DST starts on the second Sunday in March and ends on the first Sunday in November:

start=3/8/7/02:0:0;end=11/1/7/02:0:0;save=1

Just select the correct time zone offset (-6 for Central), select Yes for Ignore DHCP time offset and select Yes for DST Enable. If you are using the no offset GMT, then select No for DST Enable.

If you want 24hr display instead of 12hr, change that on the User tab on the right.

kb/common.issues/dalight.savings.spa525.txt · Last modified: 2021/10/06 19:46 by kg6baj