User Tools

Site Tools


Sidebar

Welcome

General Policies

Knowledge Base

Provisioning Guides

Firmware Updates

FAQ's

Engineering Docs

pg:unsupported:spa-2102

Cisco SPA-2102 ATA/Router Setup Guide

Important notes

  • This device is also known as the Linksys SPA-2102
  • Your Cisco SPA-2102 must be unlocked.
  • This guide does not cover ROUTER functions/options of device.
  • See bottom of page for how to factory reset this device.

NOTE: These instructions are for configuring a SPA-2102 Analog Telephone Adaptor for use on the Hamshack Hotline.

Once you get your phone adapter, simply send us the MAC address from the bottom label and we will create an HTTP profile for it. Send a picture of the MAC address label to the HHOPS Helpdesk by opening a ticket.

HHOPS helpdesk can be reached at: https://apps.hamshackhotline.com:9090


Step 1 - How to enable the ATA (Analog Terminal Adaptor) Web GUI configuration menu.

  • Power off (un-plug) your SPA-2102 device.
  • Connect an Ethernet Cable from the Internet (blue) port of the SPA-2102 to your LAN.
  • Connect your regular handset phone, to the Line-1 port of the SPA-2102.
  • Then power up (plug-in) the SPA-2102.
  • Dial * * * *      (four stars) to bring up the device's voice response menu.
  • Dial 2 1 0 #      and listen to it speak the LAN IP address to you. Write it down.
  • Dial 7 9 3 2 #      then when prompted, press 1 to enable and 1 again to confirm.

Step 2 - Login to the SPA-2102

Once the profile is created, you can quickly setup your phone or adaptor on HH simply by entering the following URL on your browser:

 http://x.x.x.x/admin/resync?http://apps.hamshackhotline.com:2443/spacfg-$MA.cfg

(NOTE: x.x.x.x is the local IP address of the phone on your LAN that you wrote down from the above steps)

HHUS Users Provision Note: Please note that you can provision your phone, but the line will not become active until after 3:30am Eastern time, the next day after you receive a response from the HHOPS helpdesk.

The HHOPS helpdesk responds to helpdesk tickets via email usually within 24-48 hours. Please remember to check your spam folder if you don’t receive a response within that time frame.

You are now ready to use Hamshack Hotline!

Dial *97 to access your voicemail box and setup your greetings & preferences!


How to Factory Reset this device

Step 1: Connect a phone into TEL1 port

Step 2: On the handset dial digits * * * *      (4 Stars)

Step 3: Dial: 7 3 7 3 8 #

Step 4: Press 1 to confirm

pg/unsupported/spa-2102.txt · Last modified: 2022/05/26 06:22 by kg6baj