Differences

This shows you the differences between two versions of the page.

--- kb:iax:trunk.info [2022/04/29 14:42] – Minor Edit kg6baj
+++ kb:iax:trunk.info [2023/10/05 06:15] (current) – Minor Edit kg6baj
@@ Line 1: / Line 1: @@
 ====== IAX2 Trunk setup in FreePBX ======
-This writeup will show you how to set up an IAX2 Trunk provided by Hamshack Hotline. It will include how to manually set a DID on the trunk which will enable you to create a single inbound route based on DID and route that to an IVR, extension, etc.
+This write-up will show you how to set up an IAX2 Trunk provided by Hamshack Hotline. It will include how to manually set a DID on the trunk which will enable you to create a single inbound route based on DID and route that to an IVR, extension, etc.
+===== Security =====
+<font inherit/inherit;;#ffa500;inherit>Hamshack Hotline allows users to connect their PBX to our system with sole purpose for __YOU ONLY__ (our direct HH customer) to place calls to HH extensions. However, __you may not provide 3rd party carriage of call traffic via your trunk.__ </font>\\
+ \\
+In other words, if your trunk allows others a means to connect or call into your PBX (from a source not HH) those callers are not allowed onto our system, as we have no means to positively identify them as a properly licensed amateur radio operator. \\
+ \\
+HH trunks fully support bi-directional traffic with this rule in mind. HH users may call your trunk to reach you. You, as an HH user, may use your trunk to call other HH users. You are not allowed to have others use your trunk to call HH users. \\
+ \\
+This is to eliminate the potential of unauthenticated traffic (we try to do our best to keep traffic compliant since we have interconnected RF systems - we take that responsibility very seriously). \\
+ \\
+<font inherit/inherit;;#ffa500;inherit>Please note, that if at any time we detect that your trunk is in violation of this policy, we will terminate your trunk extension. </font> \\
+ \\
 ===== Trunks =====
@@ Line 7: / Line 20: @@
 Before setting up a Trunk connection to HH, you will need to request an IAX2 Trunk extension number from HHOPS. Sorry, we do not do SIP Trunks. <font inherit/inherit;;#ffa500;inherit>Your PBX must be capable of IAX2 trunking.</font>
-The HHOPS helpdesk can be reached at: [[https://apps.hamshackhotline.com:9090|https://apps.hamshackhotline.com:9090]]
+The HHOPS helpdesk can be reached at: [[https://hd.hamshackhotline.com/|https://hd.hamshackhotline.com/]]
 <font inherit/inherit;;#ffa500;inherit>You will also need to have a Fully Qualified Domain Name [FQDN] already established that resolves to the IP address of your Trunk. We will not accept IP addresses directly, PERIOD ! </font>

Hamshack Hotline Wiki

User Tools

Site Tools

Differences

Page Tools