PLEASE NOTE: Currently Hamshack Hotline only connects to the N2MH AREDN MeshPhone server / hub. If you are attempting to call from HH to an AREDN number, in order for the call to complete, the AREDN MeshPhone must also be peered to the N2MH system.

If you are an independent AREDN system (Not linked to N2MH) and want to also link with HH, please reach out to Bill / KG6BAJ so we can work to peer with your AREDN MeshPhone group.

If you want to use your HH phone to call a MeshPhone extension on the Amateur Radio Emergency Data Network (AREDN), simply dial 88 + the seven digit AREDN MeshPhone extension.

Enter it all as one number. Do not dial 88 and wait for a second dial tone.

For example, to dial the time server extension of the ARDEN server in Salem, Oregon (503-8192),
you would dial 885038192 as all one number.

For more information on AREDN, please visit https://www.arednmesh.org

To see the AREDN Mesh Network Map, please visit http://usercontent.arednmesh.org/K/5/K5DLQ/livemap2.html

(Updated 04-13-2024)

MeshPhone → HH

1. Dial 76, wait for dial tone then dial the full HH extension, however long or short it might be, followed by #.

The call should go right through after the #.

Note that the HH dial tone heard on MeshPhone should sound a little different from normal dial tone.

7xxx Extensions are not supported, as Part 97 applies.

73, Mark, N2MH
MeshPhone: 973-2111
HH: 88-973-2111