Directory Search

While configuration terminology and format will vary, these can be used to configure most LDAP directory clients.

Server:

LDAP Version: 3
Use SSL: No - we do not support LDAPS, SSL, TLS, or StartTLS
Authentication/Bind
- Authentication is not required. If given the option, choose None or No or Anonymous Bind.
- If asked for Bind DN/User and/or Bind Password, both should be left blank.
Search Base DN:
```
ou=phonebook,dc=hamshackhotline,dc=com
```
Scope: sub
Search Filter
- Some configurations, e.g. Cisco, only ask for attributes and build the filter for you. See available attributes below.
- Some configurations, e.g. Snom, ask for a specially formatted search filter
  - Name Filter examples
    - Search name and callsign:
      (cn=%)
    - Search name, callsign, and city:
      (|(cn=%)(l=%))
    - Search only callsign:
      (callsign=%)
  - Number Filter example
    - Search HH phone number:
      (telephoneNumber=%)
LDAP Display Name: displayName
- May also need to include displayName in the LDAP Name Attributes
These attributes are searchable and can be used in an LDAP Filter
- Name Attributes
  - name
  - givenName
  - callsign
  - cn - includes name and callsign
  - l - city (this is a lower case L)
  - st - state/province
  - c - country
- Number Attributes
  - telephoneNumber
These attributes are useful for display
- telephoneNumber
- displayName - includes name and callsign, matches closely to HH Caller ID

Use these instructions to configure a Cisco phone to use the Hamshack Hotline LDAP directory.

From your phones web portal.

Enter parameters as listed here. Any parameter not listed should be left blank.

In the LDAP Search Base: field enter:
```
ou=phonebook,dc=hamshackhotline,dc=com
```

In the LDAP Item 4 Filter: field enter: (Note: this is a lower case L)
```
l
```

In the LDAP Display Attrs: field enter:

a=displayName,n=Caller ID;a=telephoneNumber,n=Phone,t=p;a=callsign,n=Callsign;

Press the dir virtual button, and you will be taken to the phones Directory sub-menu.